Installation on Slackware 14

The purpose of this note is to setup a guest based on Slackware. What follows was tested on Slackware 14.2 to 13.1 (both 32b and 64b). I will assume that you have a Linux-Vserver box working.

Download

wget https://notes.sagredo.eu/sites/notes.sagredo.eu/files/linux-vserver/slack_vserver.tar.gz
tar xzf slack_vserver.tar.gz
cd slack_vserver
ls

You have downloaded the following files:

PKG_LIST is the package list to be installed in the guest
download_slack_pkg.sh is a script that you can use to download all the PKG_LIST. If you use this scriptlet all the package will be stored in the slackware[64]-version_pkg sub-folder.
make_slack_vserver.sh is the shell script that you have to adjust. It installs the guest.
rc is the startup script for the virtual server. It will be automatically copied in /etc/rc.d* /init.d/rc
linux-vserver_slackware-14.2.patch is the patch which modify rc.0, rc.6 rc.M, rc.S, rc.inet2 and rc.syslog. It must be applyed after the creation of the vserver process. In the patch I switched off all the mounts and executable that are related to the hardware.

Download the packages

First of all select a minimal set of packages to be installed on the virtual server. This list of 123 packages is based on the Minimal System reported at http://slackwiki.org/Minimal_System without all hardware, kernel and multimedia related packages. The install leads to a guest of about 460M of size. This set fits with the installation of a complete virtual web server including apache, apache-tomcat, php, mysql, postgresql, qmail and related, ftp, named.

I assume that the packages to be installed are stored in the slackware{$ARCH}-{$VERSION}_pkg folder. If not, adjust its location editing the make_slack_vserver.sh script.

You can download my minimal set of packages running the shell script download_slack_pkg.sh. It can create a folder like slackware{$ARCH}-{$VERSION}_pkg for you, where $ARCH has to be "64" if you want to download 64b packages or empty otherwise, while $VERSION is the Slackware version, so it's something like "14.2".

#!/bin/bash
#
# v. 2016.06.08
# Now the script parses comments in the package list (thanks to Mark Colclough)

VERSION="14.2" # Slackware version
ARCH="64" # you can put 64 for 64b cpu just to separate 64/32 download folders

# Put here your favourite Slackware repository
SRC="ftp://ftp.slackware.no/slackware/slackware${ARCH}-${VERSION}/"

# put here your pkg list
LIST="${PWD}/PKG_LIST"

# the directory where you unpacked slack_vserver.tar.gz
# $PWD should work, otherwise put /path/to/slack_vserver
SETUP=$PWD

# the directory where you want to download the slackware packages
PACKAGES="${SETUP}/slackware${ARCH}-${VERSION}_pkg"

# create the folder where the pkg will be downloaded
if [ ! -d "$PACKAGES" ]; then
        mkdir -p $PACKAGES
fi

# create the "patches" sub-folder
if [ ! -d "${PACKAGES}/patches" ]; then
        mkdir -p "${PACKAGES}/patches"
fi

# download
cd $PACKAGES

if [ -f $LIST ]; then
        while read LINE
            do
            [ "$LINE" ] || continue
            [ "${LINE#\#}" = "$LINE" ] || continue
            wget "${SRC}slackware${ARCH}/${LINE}*.t?z"
        done < $LIST
else
        echo "Can't find $LIST file."
        exit 1
fi

# download packages from the patches folder
cd ${PACKAGES}/patches

if [ -f ${LIST} ]; then
        while read LINE
        do
                IFS='/' read -ra PKG <<< "$LINE"
                [ "${PKG#\#}" = "${PKG}" ] || continue
                PKG_LEN=${#PKG[@]}
                if [ $PKG_LEN == 2 ]; then
                        wget "${SRC}patches/packages/${PKG[1]}*.t?z"
                fi
        done < $LIST
else
        echo "Can't find $LIST file."
        exit 1
fi

NB: this script tries also to overwrite the packages downloaded from the /slackware folder with the updates belonging to the /patches dir.

Make the guest

Now let's create the guest and install the packages. As you know you must choose at least a "name", a "context" and an ip. In addition you have to modify most of the rc.* startup scripts removing all the hardware related daemons, and finally replace the /dev dir.

This is done adjusting and running the script make_slack_vserver.sh:

#!/bin/bash
#
# v. 2016.07.05
# Author: Roberto Puzzanghera
# Thanks to Mark Colclough for corrections
#
# This script installs a Slackware guest into a linux-vserver host (http://linux-vserver.org)
#
# Comments are welcome :-)
# More info here: https://notes.sagredo.eu/other-contents-186/slackware-guest-on-linux-vserver-7.html

# adjust this to where your things live
NAME=test
HOSTNAME=$NAME.YOURDOMAIN.XY
IP=10.0.0.182
INTERFACE=eth0:$IP/24
CONTEXT=5182
VERSION=14.2 # Slackware version
ARCH="64" # you can put 64 for 64b cpu just to separate 64/32 download folders

# where is the vservers dir? default is /vservers
VDIR="/usr/local/vservers"

# the directory where you unpacked slack_vserver.tar.gz
# $PWD should work, otherwise put /path/to/slack_vserver
SETUP=$PWD

# the directory where you downloaded the slackware packages
PACKAGES="${SETUP}/slackware${ARCH}-${VERSION}_pkg"

# the path to rc script file (leave as is)
RC="${SETUP}/rc"

################### end configuration

# sanity check

if [ ! -d "$VDIR" ]; then
        echo
        echo "Can't find VDIR dir: $VDIR"
        echo "Exiting"
        echo
        exit 1
fi
if [ ! -d "$SETUP" ]; then
        echo 
        echo "Can't find SETUP dir: $SETUP"
        echo "Exiting"
        echo
        exit 1
fi
if [ ! -d "$PACKAGES" ]; then
        echo
        echo "Can't find PACKAGES dir: $PACKAGES"
        echo "Exiting"
        echo
        exit 1
fi
if [ ! -f "$RC" ]; then
        echo
        echo "Can't find RC path: $RC"
        echo "Exiting"
        echo
        exit 1
fi

# if everything is ok start the install

echo
read -p "press any key to make skeleton..."
vserver ${NAME} build -m skeleton \
        --hostname ${HOSTNAME} \
        --interface ${INTERFACE} \
        --context $CONTEXT \
        --flags lock,virt_mem,virt_uptime,virt_cpu,virt_load,sched_hard,hide_netif \
        --initstyle sysv
echo "...done"
echo

read -p "press any key to move the /dev folder to a temp dir the /dev folder..."
mv $VDIR/$NAME/dev $VDIR/$NAME/dev2

echo
read -p "press any key to install packages..."
cd $PACKAGES
installpkg --root $VDIR/$NAME *.t?z;
ROOT=$VDIR/$NAME upgradepkg patches/*.t?z;
echo "...done"
echo

echo
read -p "press any key to copy the rc script to /etc/rc.d/init.d..."
echo
echo "copying rc to /etc/rc.d/init.d/rc"
cp -p $RC $VDIR/$NAME/etc/rc.d/init.d/
echo "...done"

echo
echo "removing x flag to rc.sshd and rc.inetd, removing not needed rc scripts"
chmod -x $VDIR/$NAME/etc/rc.d/rc.sshd $VDIR/$NAME/etc/rc.d/rc.inetd
rm $VDIR/$NAME/etc/rc.d/rc.cpufreq $VDIR/$NAME/etc/rc.d/rc.modules* $VDIR/$NAME/etc/rc.d/rc.inet1* $VDIR/$NAME/etc/rc.d/rc.loop
echo "...done"
echo

echo "trying to adjust HOSTNAME, hosts, resolv.conf, profile. Check them later..."
cp /etc/resolv.conf $VDIR/$NAME/etc/
cp /etc/localtime $VDIR/$NAME/etc/
rm $VDIR/$NAME/etc/profile
cp /etc/profile $VDIR/$NAME/etc/
echo $HOSTNAME >  $VDIR/$NAME/etc/HOSTNAME
echo "127.0.0.1 localhost" > $VDIR/$NAME/etc/hosts
echo "$IP $HOSTNAME $NAME" >> $VDIR/$NAME/etc/hosts
touch $VDIR/$NAME/etc/mtab
touch $VDIR/$NAME/etc/fstab
echo "...done"
echo

read -p "press any key to restore /dev2 to /dev"
rm -r $VDIR/$NAME/dev
mv $VDIR/$NAME/dev2 $VDIR/$NAME/dev

echo
echo -n "Do you want that I apply the patch for you y/n? [y] "
read VAR_PATCH

if [ "$VAR_PATCH" = 'y' ] || [ "$VAR_PATCH" = '' ]; then

        if [ ! -f "${SETUP}/linux-vserver_slackware-${VERSION}.patch" ]; then
                echo
                echo "Can't find any PATCH here: ${SETUP}/linux-vserver_slackware-${VERSION}.patch"
                echo "Exiting"
                echo
                exit 1
        fi

        cd ${VDIR}/${NAME}/etc/rc.d
        patch -p1 < ${SETUP}/linux-vserver_slackware-${VERSION}.patch
        echo "patch applyed."
        echo
        echo "You can start and enter the virtual server typing: "
        echo
        echo "vserver $NAME start"
        echo "vserver $NAME enter"

        else
                echo
                echo "DON'T FORGET to patch /etc/rc.d as follows: "
                echo
                echo "cd $VDIR/$NAME/etc/rc.d"
                echo "patch -p1 < $SETUP/linux-vserver_slackware-$VERSION.patch"
fi

echo
echo "More info on http://notes.sagredo.eu/node/7"
echo

Apply the patch

The script itsself can install the patch for you. Anyway this is how to apply the patch by yourself:

cd /vservers/vserver_name/etc/rc.d
patch -p1 < /path/to/slack_vserver/slackware-14.2.patch

Inside the tarball you can find the old patch for Slackware 14.1, 14.0, 13.37 and 13.1, if you like.

Post installation tasks

Put this inside your rc.local:

/usr/local/etc/rc.d/init.d/vprocunhide  start

Start the new server

vserver <vserver_name> start
vserver <vserver_name> enter

Patch applayed

diff -ruN rc.d-original/rc.6 rc.d/rc.6
--- rc.d-original/rc.6	2016-03-26 17:48:37.000000000 +0100
+++ rc.d/rc.6	2016-07-09 14:08:48.470713168 +0200
@@ -37,36 +37,6 @@
 		;;
 esac
 
-# Save the system time to the hardware clock using hwclock --systohc.
-# This will also create or update the timestamps in /etc/adjtime.
-if [ -x /sbin/hwclock ]; then
-  # Check for a broken motherboard RTC clock (where ioports for rtc are
-  # unknown) to prevent hwclock causing a hang:
-  if ! grep -q " : rtc" /proc/ioports ; then
-    CLOCK_OPT="--directisa"
-  fi
-  if [ /etc/adjtime -nt /etc/hardwareclock ]; then
-    if grep -q "^LOCAL" /etc/adjtime ; then
-      echo "Saving system time to the hardware clock (localtime)."
-    else
-      echo "Saving system time to the hardware clock (UTC)."
-    fi
-    /sbin/hwclock $CLOCK_OPT --systohc
-  elif grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
-    echo "Saving system time to the hardware clock (UTC)."
-    if [ ! -r /etc/adjtime ]; then
-      echo "Creating system time correction file /etc/adjtime."
-    fi
-    /sbin/hwclock $CLOCK_OPT --utc --systohc
-  else
-    echo "Saving system time to the hardware clock (localtime)."
-    if [ ! -r /etc/adjtime ]; then
-      echo "Creating system time correction file /etc/adjtime."
-    fi
-    /sbin/hwclock $CLOCK_OPT --localtime --systohc
-  fi
-fi
-
 # Run any local shutdown scripts:
 if [ -x /etc/rc.d/rc.local_shutdown ]; then
   /etc/rc.d/rc.local_shutdown stop
@@ -126,10 +96,6 @@
   sleep $FUSER_DELAY
 fi
 
-# Unmount any NFS, SMB, or CIFS filesystems:
-echo "Unmounting remote filesystems:"
-/bin/umount -v -a -l -f -r -t nfs,smbfs,cifs | tr -d ' ' | grep successfully | sed "s/:successfullyunmounted/ has been successfully unmounted./g"
-
 # Try to shut down pppd:
 PS="$(ps ax)"
 if echo "$PS" | /bin/grep -q -w pppd ; then
@@ -215,22 +181,11 @@
 # Before unmounting file systems write a reboot or halt record to wtmp.
 $shutdown_command -w
 
-# Turn off swap:
-echo "Turning off swap."
-/sbin/swapoff -a
-/bin/sync
-
 # Stop cgmanager and cgproxy:
 if [ -x /etc/rc.d/rc.cgmanager ]; then
   sh /etc/rc.d/rc.cgmanager stop
 fi
 
-echo "Unmounting local file systems:"
-/bin/umount -v -a -t no,proc,sysfs | tr -d ' ' | grep successfully | sed "s/:successfullyunmounted/ has been successfully unmounted./g" 2> /dev/null
-
-echo "Remounting root filesystem read-only:"
-/bin/mount -v -n -o remount,ro /
-
 # This never hurts:
 /bin/sync
 
@@ -288,12 +243,3 @@
     fi
   fi
 fi
-
-# Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
-if [ "$shutdown_command" = "reboot" ]; then
-  echo "Rebooting."
-  /sbin/reboot
-else
-  /sbin/poweroff
-fi
-
diff -ruN rc.d-original/rc.M rc.d/rc.M
--- rc.d-original/rc.M	2016-05-05 06:27:00.000000000 +0200
+++ rc.d/rc.M	2016-07-09 14:14:20.090096570 +0200
@@ -20,10 +20,6 @@
   /sbin/ldconfig &
 fi
 
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
 # Set the hostname.
 if [ -r /etc/HOSTNAME ]; then
   /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
@@ -109,13 +105,6 @@
   sh /etc/rc.d/rc.bluetooth start
 fi
 
-# Start wicd or networkmanager:
-if [ -x /etc/rc.d/rc.wicd -a -x /usr/sbin/wicd ]; then
-  sh /etc/rc.d/rc.wicd start
-elif [ -x /etc/rc.d/rc.networkmanager ]; then
-  sh /etc/rc.d/rc.networkmanager start
-fi
-
 # Start networking daemons:
 if [ -x /etc/rc.d/rc.inet2 ]; then
   . /etc/rc.d/rc.inet2
@@ -126,14 +115,6 @@
   . /etc/rc.d/rc.scanluns
 fi
 
-# Mount any additional filesystem types that haven't already been mounted:
-mount -a -v 2> /dev/null | grep -v -e "already mounted" -e "ignored" | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
-
-# Start the Control Script for automounter:
-if [ -x /etc/rc.d/rc.autofs ]; then
-  sh /etc/rc.d/rc.autofs start
-fi
-
 # Start the Network Time Protocol daemon:
 if [ -x /etc/rc.d/rc.ntpd ]; then
   sh /etc/rc.d/rc.ntpd start
@@ -153,16 +134,6 @@
 chmod 755 / 2> /dev/null
 chmod 1777 /tmp /var/tmp
 
-# Start ACPI daemon.
-if [ -x /etc/rc.d/rc.acpid ]; then
-  . /etc/rc.d/rc.acpid start
-fi
-
-# Enable CPU frequency scaling:
-if [ -x /etc/rc.d/rc.cpufreq ]; then
-  . /etc/rc.d/rc.cpufreq start
-fi
-
 # Update any existing icon cache files:
 if find /usr/share/icons -maxdepth 2 2> /dev/null | grep -q icon-theme.cache ; then
   for theme_dir in /usr/share/icons/* ; do
diff -ruN rc.d-original/rc.inet2 rc.d/rc.inet2
--- rc.d-original/rc.inet2	2012-08-15 00:53:35.000000000 +0200
+++ rc.d/rc.inet2	2016-07-09 14:10:49.388841574 +0200
@@ -16,51 +16,6 @@
 # At this point, we are ready to talk to The World...
 
 
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
-  # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS
-  # volumes defined in /etc/fstab since these will need to be running in order
-  # to mount them.  If they are not running, attempting to mount an NFS
-  # partition will cause mount to hang, or at least result in unreliable
-  # operation.  Keep this in mind if you plan to mount unlisted NFS
-  # partitions... 
-  # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run
-  # whether it is set as executable or not.  If you don't want to run it,
-  # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc.
-  if [ -r /etc/rc.d/rc.rpc ]; then
-    sh /etc/rc.d/rc.rpc start
-  fi
-  echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
-  /sbin/mount -a -t nfs          # This may be our /usr runtime!
-  # Show the mounted volumes:
-  /sbin/mount -v -t nfs
-fi
-
-# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
-# and rpc.statd.  This might be needed to mount NFS partitions that are not
-# listed in /etc/fstab.  Starting this twice won't hurt as the script will
-# check if things are already running before trying to start them.
-if [ -x /etc/rc.d/rc.rpc ]; then
-  sh /etc/rc.d/rc.rpc start
-fi
-
-# Mount remote CIFS filesystems.  Note that where possible, using CIFS is
-# preferred over SMBFS.  SMBFS is no longer actively maintained.
-if cat /etc/fstab | grep -v '^#' | grep -w cifs 1> /dev/null 2> /dev/null ; then
-  echo "Mounting remote CIFS file systems:  /sbin/mount -a -t cifs"
-  /sbin/mount -a -t cifs
-  # Show the mounted volumes:
-  /sbin/mount -v -t cifs
-fi
-
-# Mount remote SMB filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
-  echo "Mounting remote SMBFS file systems:  /sbin/mount -a -t smbfs"
-  /sbin/mount -a -t smbfs
-  # Show the mounted volumes:
-  /sbin/mount -v -t smbfs
-fi

Contact

Comments and criticism can be addressed to roberto dot puzzanghera at sagredo dot eu (http://notes.sagredo.eu/node/7)

Installation on Slackware 14

From Linux-VServer

Contents

Download

Download the packages

Make the guest

Apply the patch

Post installation tasks

Start the new server

Patch applayed

Contact

Views

Personal tools

Search

About

Getting Started

Participate

Resources

Toolbox