Installation on Slackware 13
From Linux-VServer
Revision as of 23:37, 28 April 2011 by Roberto.puzzanghera (Talk | contribs)
What follows was tested on a Slackware 13.37 and 13.1 guest. I assume you have a Linux-Vserver host working.
Contents |
Download the patch and the installer script
tar xzf slack_vserver.tar.gz cd slack_vserver ls
- PKG_LIST is the package list to be installed in the guest
- slackware_pkg/ is the folder were the packages (txz) to be installed are stored.
- download_slack.sh is a script that you can use to download all the PKG_LIST. If you use this scriptlet all the package will be stored in the slackware_pkg sub-folder.
- make_slack_vserver.sh is the shell script that you have to adjust. It installs the guest.
- slackware-13.37.patch is the patch which modify rc.6 rc.M and rc.inet2. It must be applyed after the creation of the guest. In the patch I switched off all the mounts and executable that are related to the hardware.
- rc is the startup script for the virtual server. It will be automatically copied in /etc/rc.d/init.d/rc
# more rc #!/bin/bash if [ "$1" == "3" ]; then /etc/rc.d/rc.M elif [ "$1" == "6" ]; then /etc/rc.d/rc.6 else echo "Invalid level." exit 1 fi
Download the slack packages
First of all select a minimal set of packages to be installed on the virtual server. This list of 109 packages is based on the Minimal System reported at http://slackwiki.org/Minimal_System without all hardware, kernel and multimedia related packages. The install leads to a guest of about 448M of size.
I assume that the packages to be installed are stored in the slackware_pkg folder. If not, adjust its location editing the make_slack_vserver.sh script.
You can download my minimal set of packages running the shell script download_slack_pkg.sh
#!/bin/bash
#
# v. 2011.01.07
# Put here your favourite Slackware repository
SRC="ftp://ftp.slackware.no/slackware/slackware-13.1/slackware/" # 32-bit
#SRC="ftp://ftp.slackware.no/slackware/slackware64-13.1/slackware64/" # 64-bit
LIST="../PKG_LIST"
cd slackware_pkg
if [ -f $LIST ]; then
while read line
do
wget "$SRC$line*.t?z"
done < $LIST
else
echo "Can't find $LIST file."
exit 1
fi
rm index.html*
Adjust the package PKG_LIST Slackware_package_list, enter your favorite ftp server and run from the command line
./download_slack_pkg.sh
Make the guest
Now let's create the guest and install the packages. As you know you must choose at least a "name", a "context" and an ip. In addition you have to modify most of the rc.* startup scripts removing all the hardware related daemons, and finally replace the /dev dir.
This is done running the script make_slack_vserver.sh:
#!/bin/bash
#
# v. 2011.04.28
# Author: Roberto Puzzanghera
#
# This script installs a Slackware guest into a linux-vserver host (http://linux-vserver.org)
#
# Comments are welcome :-)
# More info here: http://notes.sagredo.eu/node/7
if [ $# != 1 ]; then
echo "usage: $0 <server-name>"
exit 1
fi
# adjust this to where your things live
NAME=$1
HOSTNAME=$NAME.myserver.net
IP=10.0.0.149
INTERFACE=eth0:$IP/24
CONTEXT=1011
VERSION=13.37 # Slackware version
# where is the vservers dir? default is /vservers
VDIR="/vservers"
# the directory where you unpacked slack_vserver.tar.gz
# $PWD should work, otherwise put /path/to/slack_vserver
SETUP=$PWD
# the directory where you downloaded the slackware packages
PACKAGES="$SETUP/slackware_pkg"
# the path to rc script file (leave as is)
RC="$SETUP/rc"
################### end configuration
# sanity check
if [ ! -d "$VDIR" ]; then
echo
echo "Can't find VDIR dir: $VDIR"
echo "Exiting"
echo
exit 1
fi
if [ ! -d "$SETUP" ]; then
echo
echo "Can't find SETUP dir: $SETUP"
echo "Exiting"
echo
exit 1
fi
if [ ! -d "$PACKAGES" ]; then
echo
echo "Can't find PACKAGES dir: $PACKAGES"
echo "Exiting"
echo
exit 1
fi
if [ ! -f "$RC" ]; then
echo
echo "Can't find RC path: $RC"
echo "Exiting"
echo
exit 1
fi
# if everything is ok start the install
echo
read -p "press any key to make skeleton..."
vserver ${NAME} build -m skeleton \
--hostname ${HOSTNAME} \
--interface ${INTERFACE} \
--context $CONTEXT \
--flags lock,virt_mem,virt_uptime,virt_cpu,virt_load,sched_hard,hide_netif \
--initstyle sysv
echo "...done"
echo
read -p "press any key to move the /dev folder to a temp dir the /dev folder..."
mv $VDIR/$NAME/dev $VDIR/$NAME/dev2
echo
read -p "press any key to install packages..."
cd $PACKAGES
installpkg -root $VDIR/$NAME *.t?z;
echo "...done"
echo
echo
read -p "press any key to copy the rc script to /etc/rc.d/init.d..."
echo
echo "copying rc to /etc/rc.d/init.d/rc"
cp -p $RC $VDIR/$NAME/etc/rc.d/init.d/
echo "...done"
echo
echo "removing x flag to rc.inet1 rc.loop and rc.sshd"
chmod -x $VDIR/$NAME/etc/rc.d/rc.inet1 $VDIR/$NAME/etc/rc.d/rc.loop $VDIR/$NAME/etc/rc.d/rc.sshd
echo "...done"
echo
echo "trying to adjust HOSTNAME, hosts, resolv.conf, profile. Check later..."
cp /etc/resolv.conf $VDIR/$NAME/etc/
cp /etc/localtime $VDIR/$NAME/etc/
rm $VDIR/$NAME/etc/profile
cp /etc/profile $VDIR/$NAME/etc/
echo $HOSTNAME > $VDIR/$NAME/etc/HOSTNAME
echo "127.0.0.1 localhost" > $VDIR/$NAME/etc/hosts
echo "$IP $HOSTNAME $NAME" >> $VDIR/$NAME/etc/hosts
touch $VDIR/$NAME/etc/mtab
touch $VDIR/$NAME/etc/fstab
echo "...done"
echo
read -p "press any key to restore /dev2 to /dev"
rm -r $VDIR/$NAME/dev
mv $VDIR/$NAME/dev2 $VDIR/$NAME/dev
echo
echo -n "Do you want that I apply the patch for you y/n? [y] "
read VAR_PATCH
if [ "$VAR_PATCH" = 'y' ] || [ "$VAR_PATCH" = '' ]; then
cd $VDIR/$NAME/etc/rc.d
patch -p1 < $SETUP/linux-vserver_slackware-$VERSION.patch
echo "patch applyed."
echo
echo "You can start and enter the virtual server typing: "
echo
echo "vserver $NAME start"
echo "vserver $NAME enter"
else
echo
echo "DON'T FORGET to patch /etc/rc.d as follows: "
echo
echo "cd $VDIR/$NAME/etc/rc.d"
echo "patch -p1 < $SETUP/linux-vserver_slackware-$VERSION.patch"
fi
echo
echo "More info on http://notes.sagredo.eu/node/7"
echo
Apply the patch and start the guest
The script itsself can install the patch for you. Anyway this is how to apply the patch by yourself:
cd /vservers/vserver_name/etc/rc.d The script itsself can install the patch for you. Anyway this is how to apply the patch by yourself:patch -p1 < /path/to/slack_vserver/slackware-13.37.patch
Now you can start the newly created virtual server:
vserver <vserver_name> start vserver <vserver_name> enter
Contact
Any comments/suggestions/questions to roberto dot puzzanghera at sagredo dot eu, [1]
Patch used
Patch for Slackware 13.37 guest on a Linux-Vserver host
========================================================
by Roberto Puzzanghera - http://notes.sagredo.eu
version: 2011.04.28
========================================================
diff -urNB rc.d-original/rc.0 rc.d/rc.0
--- rc.d-original/rc.0 2011-04-16 23:14:14.000000000 +0200
+++ rc.d/rc.0 2011-04-28 15:01:59.000000000 +0200
@@ -37,22 +37,6 @@
;;
esac
-# Save the system time to the hardware clock using hwclock --systohc.
-if [ -x /sbin/hwclock ]; then
- # Check for a broken motherboard RTC clock (where ioports for rtc are
- # unknown) to prevent hwclock causing a hang:
- if ! grep -q -w rtc /proc/ioports ; then
- CLOCK_OPT="--directisa"
- fi
- if grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
- echo "Saving system time to the hardware clock (UTC)."
- /sbin/hwclock $CLOCK_OPT --utc --systohc
- else
- echo "Saving system time to the hardware clock (localtime)."
- /sbin/hwclock $CLOCK_OPT --localtime --systohc
- fi
-fi
-
# Run any local shutdown scripts:
if [ -x /etc/rc.d/rc.local_shutdown ]; then
/etc/rc.d/rc.local_shutdown stop
@@ -98,66 +82,11 @@
sh /etc/rc.d/rc.messagebus stop
fi
-# Kill any processes (typically gam) that would otherwise prevent
-# unmounting NFS volumes:
-unset FUSER_DELAY
-for dir in $(/bin/mount | grep 'type nfs' | cut -d ' ' -f 3 ) ; do
- echo "Killing processes holding NFS mount $dir open..."
- # Background this to prevent fuser from also blocking shutdown:
- /usr/bin/fuser -k -m $dir &
- FUSER_DELAY=5
-done
-# If fuser was run, let it have some delay:
-if [ ! -z "$FUSER_DELAY" ]; then
- sleep $FUSER_DELAY
-fi
-
-# Unmount any NFS, SMB, or CIFS filesystems:
-echo "Unmounting remote filesystems."
-/bin/umount -v -a -l -f -r -t nfs,smbfs,cifs
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | /bin/grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Bring down the networking system, but first make sure that this
-# isn't a diskless client with the / partition mounted via NFS:
-if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
- if [ -x /etc/rc.d/rc.inet1 ]; then
- . /etc/rc.d/rc.inet1 stop
- fi
-fi
-
-# In case dhcpcd might have been manually started on the command line,
-# look for the .pid file, and shut dhcpcd down if it's found:
-if /bin/ls /etc/dhcpc/*.pid 1> /dev/null 2> /dev/null ; then
- /sbin/dhcpcd -k 1> /dev/null 2> /dev/null
- # A little time for /etc/resolv.conf and/or other files to
- # restore themselves.
- sleep 2
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to deactivate:
- /bin/sleep 5
-fi
-
# Turn off process accounting:
if [ -x /sbin/accton -a -r /var/log/pacct ]; then
/sbin/accton off
fi
-# Terminate acpid before syslog:
-if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
- . /etc/rc.d/rc.acpid stop
-fi
-
# Kill all processes.
# INIT is supposed to handle this entirely now, but this didn't always
# work correctly without this second pass at killing off the processes.
@@ -177,16 +106,6 @@
fi
fi
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-/bin/chmod 600 /etc/random-seed
-
# Before unmounting file systems write a reboot or halt record to wtmp.
$command -w
@@ -195,17 +114,6 @@
rm -f /var/lock/subsys/*
fi
-# Turn off swap:
-echo "Turning off swap."
-/sbin/swapoff -a
-/bin/sync
-
-echo "Unmounting local file systems."
-/bin/umount -v -a -t no,proc,sysfs
-
-echo "Remounting root filesystem read-only."
-/bin/mount -v -n -o remount,ro /
-
# This never hurts:
/bin/sync
@@ -230,45 +138,10 @@
done
fi
-# Deactivate LVM volume groups:
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
-fi
-
# This never hurts again (especially since root-on-LVM always fails
# to deactivate the / logical volume... but at least it was
# remounted as read-only first)
/bin/sync
-# sleep 3 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-/bin/sleep 3
-
# This is to ensure all processes have completed on SMP machines:
wait
-
-if [ -x /sbin/genpowerd ]; then
- # See if this is a powerfail situation:
- if /bin/egrep -q "FAIL|SCRAM" /etc/upsstatus 2> /dev/null ; then
- # Signal UPS to shut off the inverter:
- /sbin/genpowerd -k
- if [ ! $? = 0 ]; then
- echo
- echo "There was an error signaling the UPS."
- echo "Perhaps you need to edit /etc/genpowerd.conf to configure"
- echo "the serial line and UPS type."
- # Wasting 15 seconds of precious power:
- /bin/sleep 15
- fi
- fi
-fi
-
-# Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
-if [ "$command" = "reboot" ]; then
- echo "Rebooting."
- /sbin/reboot
-else
- /sbin/poweroff
-fi
-
diff -urNB rc.d-original/rc.6 rc.d/rc.6
--- rc.d-original/rc.6 2011-04-16 23:14:14.000000000 +0200
+++ rc.d/rc.6 2011-04-28 15:01:59.000000000 +0200
@@ -37,22 +37,6 @@
;;
esac
-# Save the system time to the hardware clock using hwclock --systohc.
-if [ -x /sbin/hwclock ]; then
- # Check for a broken motherboard RTC clock (where ioports for rtc are
- # unknown) to prevent hwclock causing a hang:
- if ! grep -q -w rtc /proc/ioports ; then
- CLOCK_OPT="--directisa"
- fi
- if grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
- echo "Saving system time to the hardware clock (UTC)."
- /sbin/hwclock $CLOCK_OPT --utc --systohc
- else
- echo "Saving system time to the hardware clock (localtime)."
- /sbin/hwclock $CLOCK_OPT --localtime --systohc
- fi
-fi
-
# Run any local shutdown scripts:
if [ -x /etc/rc.d/rc.local_shutdown ]; then
/etc/rc.d/rc.local_shutdown stop
@@ -98,66 +82,11 @@
sh /etc/rc.d/rc.messagebus stop
fi
-# Kill any processes (typically gam) that would otherwise prevent
-# unmounting NFS volumes:
-unset FUSER_DELAY
-for dir in $(/bin/mount | grep 'type nfs' | cut -d ' ' -f 3 ) ; do
- echo "Killing processes holding NFS mount $dir open..."
- # Background this to prevent fuser from also blocking shutdown:
- /usr/bin/fuser -k -m $dir &
- FUSER_DELAY=5
-done
-# If fuser was run, let it have some delay:
-if [ ! -z "$FUSER_DELAY" ]; then
- sleep $FUSER_DELAY
-fi
-
-# Unmount any NFS, SMB, or CIFS filesystems:
-echo "Unmounting remote filesystems."
-/bin/umount -v -a -l -f -r -t nfs,smbfs,cifs
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | /bin/grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Bring down the networking system, but first make sure that this
-# isn't a diskless client with the / partition mounted via NFS:
-if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
- if [ -x /etc/rc.d/rc.inet1 ]; then
- . /etc/rc.d/rc.inet1 stop
- fi
-fi
-
-# In case dhcpcd might have been manually started on the command line,
-# look for the .pid file, and shut dhcpcd down if it's found:
-if /bin/ls /etc/dhcpc/*.pid 1> /dev/null 2> /dev/null ; then
- /sbin/dhcpcd -k 1> /dev/null 2> /dev/null
- # A little time for /etc/resolv.conf and/or other files to
- # restore themselves.
- sleep 2
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to deactivate:
- /bin/sleep 5
-fi
-
# Turn off process accounting:
if [ -x /sbin/accton -a -r /var/log/pacct ]; then
/sbin/accton off
fi
-# Terminate acpid before syslog:
-if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
- . /etc/rc.d/rc.acpid stop
-fi
-
# Kill all processes.
# INIT is supposed to handle this entirely now, but this didn't always
# work correctly without this second pass at killing off the processes.
@@ -177,16 +106,6 @@
fi
fi
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-/bin/chmod 600 /etc/random-seed
-
# Before unmounting file systems write a reboot or halt record to wtmp.
$command -w
@@ -195,17 +114,6 @@
rm -f /var/lock/subsys/*
fi
-# Turn off swap:
-echo "Turning off swap."
-/sbin/swapoff -a
-/bin/sync
-
-echo "Unmounting local file systems."
-/bin/umount -v -a -t no,proc,sysfs
-
-echo "Remounting root filesystem read-only."
-/bin/mount -v -n -o remount,ro /
-
# This never hurts:
/bin/sync
@@ -230,45 +138,10 @@
done
fi
-# Deactivate LVM volume groups:
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
-fi
-
# This never hurts again (especially since root-on-LVM always fails
# to deactivate the / logical volume... but at least it was
# remounted as read-only first)
/bin/sync
-# sleep 3 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-/bin/sleep 3
-
# This is to ensure all processes have completed on SMP machines:
wait
-
-if [ -x /sbin/genpowerd ]; then
- # See if this is a powerfail situation:
- if /bin/egrep -q "FAIL|SCRAM" /etc/upsstatus 2> /dev/null ; then
- # Signal UPS to shut off the inverter:
- /sbin/genpowerd -k
- if [ ! $? = 0 ]; then
- echo
- echo "There was an error signaling the UPS."
- echo "Perhaps you need to edit /etc/genpowerd.conf to configure"
- echo "the serial line and UPS type."
- # Wasting 15 seconds of precious power:
- /bin/sleep 15
- fi
- fi
-fi
-
-# Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
-if [ "$command" = "reboot" ]; then
- echo "Rebooting."
- /sbin/reboot
-else
- /sbin/poweroff
-fi
-
diff -urNB rc.d-original/rc.M rc.d/rc.M
--- rc.d-original/rc.M 2011-03-22 07:15:15.000000000 +0100
+++ rc.d/rc.M 2011-04-28 19:07:47.000000000 +0200
@@ -20,10 +20,6 @@
/sbin/ldconfig &
fi
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
# Set the hostname.
if [ -r /etc/HOSTNAME ]; then
/bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
@@ -47,31 +43,6 @@
# Save the contents of 'dmesg':
/bin/dmesg -s 65536 > /var/log/dmesg
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives. This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down. If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-# Note that the stuff in /etc/pcmcia/ is only for 2.4.x kernels using
-# 16-bit PCMCIA cards (not 32-bit Cardbus cards!). For example, with a
-# wireless card you might need to set options in /etc/pcmcia OR in
-# /etc/rc.d/rc.wireless.conf, or even in /etc/rc.d/rc.inet1.conf (with
-# extra options if needed for the encryption key, ESSID, etc.)
-#
-# Hopefully this situation will be unified in the future, but for now
-# that's how it is...
-#
-if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- sleep 5
-fi
-
# Start the system logger.
if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
. /etc/rc.d/rc.syslog start
@@ -83,38 +54,18 @@
/usr/bin/fc-cache -f &
fi
-# If we are returning from single-user mode we will need to restart
-# udevd on systems that use udev:
-if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
- if ! grep -wq nohotplug /proc/cmdline ; then
- if [ -x /etc/rc.d/rc.udev ]; then
- /bin/sh /etc/rc.d/rc.udev start
- fi
- fi
-fi
-
-# Initialize the networking hardware.
-if [ -x /etc/rc.d/rc.inet1 ]; then
- . /etc/rc.d/rc.inet1
-fi
-
-# Look for additional USB/SCSI/IEEE1394/etc devices on multiple LUNs:
-if [ -x /etc/rc.d/rc.scanluns ]; then
- . /etc/rc.d/rc.scanluns
-fi
-
# Start networking daemons:
if [ -x /etc/rc.d/rc.inet2 ]; then
. /etc/rc.d/rc.inet2
fi
# Mount any additional filesystem types that haven't already been mounted:
-mount -a -v 2> /dev/null | grep -v "already mounted"
+#mount -a -v 2> /dev/null | grep -v "already mounted"
# Start the Control Script for automounter:
-if [ -x /etc/rc.d/rc.autofs ]; then
- sh /etc/rc.d/rc.autofs start
-fi
+#if [ -x /etc/rc.d/rc.autofs ]; then
+# sh /etc/rc.d/rc.autofs start
+#fi
# Start the Network Time Protocol daemon:
if [ -x /etc/rc.d/rc.ntpd ]; then
@@ -134,17 +85,6 @@
chmod 755 / 2> /dev/null
chmod 1777 /tmp /var/tmp
-# Start APM or ACPI daemon.
-# If APM is enabled in the kernel, start apmd:
-if [ -e /proc/apm ]; then
- if [ -x /usr/sbin/apmd ]; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
-elif [ -x /etc/rc.d/rc.acpid ]; then # otherwise, start acpid:
- . /etc/rc.d/rc.acpid start
-fi
-
# Update any existing icon cache files:
if find /usr/share/icons 2> /dev/null | grep -q icon-theme.cache ; then
for theme_dir in /usr/share/icons/* ; do
@@ -177,21 +117,6 @@
sh /etc/rc.d/rc.consolekit start
fi
-# Start HAL:
-if [ -x /etc/rc.d/rc.hald ]; then
- sh /etc/rc.d/rc.hald start
-fi
-
-# Start Bluetooth:
-if [ -x /etc/rc.d/rc.bluetooth ]; then
- sh /etc/rc.d/rc.bluetooth start
-fi
-
-# Start wicd:
-if [ -x /etc/rc.d/rc.wicd ]; then
- sh /etc/rc.d/rc.wicd start
-fi
-
# These GTK+/pango files need to be kept up to date for
# proper input method, pixbuf loaders, and font support.
if [ -x /usr/bin/update-gtk-immodules ]; then
@@ -228,36 +153,6 @@
/etc/rc.d/rc.atalk
fi
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
-
-# If we're using udev, make /dev/cdrom and any other optical drive symlinks
-# if some udev rule hasn't made them already:
-if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems; then
- if ! grep -wq nohotplug /proc/cmdline ; then
- if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then
- /bin/sh /lib/udev/rc.optical-symlinks
- fi
- fi
-fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-*/ directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-# echo "Starting genpowerd daemon..."
-# /sbin/genpowerd
-#fi
-
# Turn on process accounting. To enable process accounting, make sure the
# option for BSD process accounting is enabled in your kernel, and then
# create the file /var/log/pacct (touch /var/log/pacct). By default, process
@@ -322,11 +217,6 @@
. /etc/rc.d/rc.sendmail start
fi
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
-fi
-
# Load a custom screen font if the user has an rc.font script.
if [ -x /etc/rc.d/rc.font ]; then
. /etc/rc.d/rc.font
@@ -358,11 +248,6 @@
. /etc/rc.d/rc.samba start
fi
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
-fi
-
# If there are SystemV init scripts for this runlevel, run them.
if [ -x /etc/rc.d/rc.sysvinit ]; then
. /etc/rc.d/rc.sysvinit
diff -urNB rc.d-original/rc.inet2 rc.d/rc.inet2
--- rc.d-original/rc.inet2 2007-09-18 00:07:32.000000000 +0200
+++ rc.d/rc.inet2 2011-04-28 19:09:27.000000000 +0200
@@ -16,26 +16,6 @@
# At this point, we are ready to talk to The World...
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
- # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS
- # volumes defined in /etc/fstab since these will need to be running in order
- # to mount them. If they are not running, attempting to mount an NFS
- # partition will cause mount to hang, or at least result in unreliable
- # operation. Keep this in mind if you plan to mount unlisted NFS
- # partitions...
- # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run
- # whether it is set as executable or not. If you don't want to run it,
- # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc.
- if [ -r /etc/rc.d/rc.rpc ]; then
- sh /etc/rc.d/rc.rpc start
- fi
- echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs"
- /sbin/mount -a -t nfs # This may be our /usr runtime!
- # Show the mounted volumes:
- /sbin/mount -v -t nfs
-fi
-
# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
# and rpc.statd. This might be needed to mount NFS partitions that are not
# listed in /etc/fstab. Starting this twice won't hurt as the script will
@@ -44,23 +24,6 @@
sh /etc/rc.d/rc.rpc start
fi
-# Mount remote CIFS filesystems. Note that where possible, using CIFS is
-# preferred over SMBFS. SMBFS is no longer actively maintained.
-if cat /etc/fstab | grep -v '^#' | grep -w cifs 1> /dev/null 2> /dev/null ; then
- echo "Mounting remote CIFS file systems: /sbin/mount -a -t cifs"
- /sbin/mount -a -t cifs
- # Show the mounted volumes:
- /sbin/mount -v -t cifs
-fi
-
-# Mount remote SMB filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
- echo "Mounting remote SMBFS file systems: /sbin/mount -a -t smbfs"
- /sbin/mount -a -t smbfs
- # Show the mounted volumes:
- /sbin/mount -v -t smbfs
-fi
-
# Start the system logger if it is not already running (maybe because /usr
# is on a network partition).
if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
diff -urNB rc.d-original/rc.syslog rc.d/rc.syslog
--- rc.d-original/rc.syslog 2010-10-21 01:03:54.000000000 +0200
+++ rc.d/rc.syslog 2011-04-28 20:20:26.000000000 +0200
@@ -5,8 +5,9 @@
syslogd_start() {
if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then
- echo -n "Starting sysklogd daemons: "
- echo -n "/usr/sbin/syslogd "
+# echo -n "Starting sysklogd daemons: "
+ echo -n "Starting /usr/sbin/syslogd "
+ echo
/usr/sbin/syslogd
# prevent syslogd/klogd race condition on SMP kernels
if ps acx | grep -q udevd ; then
@@ -16,10 +17,10 @@
else
sleep 1
fi
- echo "/usr/sbin/klogd -c 3 -x"
+# echo "/usr/sbin/klogd -c 3 -x"
# '-c 3' = display level 'error' or higher messages on console
# '-x' = turn off broken EIP translation
- /usr/sbin/klogd -c 3 -x
+# /usr/sbin/klogd -c 3 -x
fi
}
Slackware package list
Here is the content of the file PKG_LIST
# v. 2011.01.07 # some commented pkg to avoid duplicates (man will download both man and man-pages) #[A] a/aaa_base a/aaa_elflibs a/aaa_terminfo a/acl a/attr a/bash a/bin a/bzip2 a/coreutils a/cpio a/cxxlibs a/dcron a/dialog a/etc a/file a/findutils a/gawk a/gettext a/glibc-solibs a/glibc-zoneinfo a/grep a/gzip a/infozip a/kbd a/less a/logrotate a/openssl-solibs a/patch a/pkgtools a/procps a/quota a/sed a/shadow a/slocate a/sysklogd a/sysvinit # a/sysvinit-functions # a/sysvinit-scripts a/tar a/time a/tree a/utempter a/util-linux a/xz a/which #[AP] ap/at ap/diffutils ap/groff ap/lsof ap/man # ap/man-pages ap/most ap/nano ap/sudo ap/vim #[D] d/autoconf d/automake d/binutils d/bison d/flex d/gcc-4 d/gcc-g++ d/gettext-tools d/kernel-headers d/libtool d/m4 d/make d/perl d/pkg-config #[L] l/apr l/db42 l/db44 l/freetype l/gd- l/gdbm l/glibc # l/glibc-i18n l/libjpeg l/libmcrypt l/libpng l/lzo l/mpfr l/ncurses l/pcre l/popt l/readline l/v4l-utils l/libxslt l/t1lib l/zlib #[N] n/cyrus-sasl n/inetd n/iproute2 n/iputils n/libgcrypt n/mtr n/net-tools n/netwatch n/network-scripts n/ntp n/openssh n/openssl n/tcp_wrappers n/telnet n/traceroute n/wget
