Installation on Slackware 13
From Linux-VServer
Revision as of 22:24, 28 October 2010 by Roberto.puzzanghera (Talk | contribs)
What follows was tested on a Slackware 13.1 guest. I assume you have a Linux-Vserver host working.
Contents |
Download the patch and the installer script
cd /usr/local/src wget http://notes.sagredo.eu/sites/notes.sagredo.eu/files/linux-vserver/slack_vserver.tar.gz tar xzf slack_vserver.tar.gz chown -R root.root slack_vserver ls
- slackware-13.1.patch is the patch which modify rc.0 rc.6 rc.M rc.K and rc.inet2. It must be applyed after the creation of the guest. In the patch I switched off all the executable that are related to the hardware, including the rc.inet1, and rc.6. Inside rc./d/init.d/ you can find the rc script that starts the vserver. Comments would be welcome about this :-).
- make_slack_vserver.sh is the shell script that you have to adjust. It installs the guest.
- PKG_LIST is my Slackware package list
- download_slack.sh is a script that you can use to download all the PKG_LIST
- rc is the startup script for the virtual server. It will be automatically copied in /etc/rc.d/init.d/rc
# more rc if [ $1 -eq 3 ]; then echo "entering runlevel 3: multi"; /etc/rc.d/rc.M fi if [ $1 -eq 6 ]; then echo "entering runlevel 6: reboot"; /etc/rc.d/rc.6 fi if [ $1 -eq 0 ]; then echo "entering runlevel 0: shutdown"; /etc/rc.d/rc.0 fi if [ $1 -eq 4 ]; then echo "entering runlevel 4"; fi if [ $1 -eq 5 ]; then echo "entering runlevel 5"; fi if [ $1 -eq 1 ]; then echo "entering runlevel 1:single"; /etc/rc.d/rc.K fi if [ $1 -eq 2 ]; then echo "entering runlevel 2:multi"; /etc/rc.d/rc.M fi
Download the slack packages
First of all select a minimal set of packages to be installed on the virtual server. This list of 108 packages is based on the Minimal System reported at http://slackwiki.org/Minimal_System without all hardware, kernel and multimedia related packages. The install leads to a guest of about 448M of size.
Create a folder where to store the Slackware packages to install in the new server.
mkdir slackware cd slackware
If you decide to download the packages via ftp, create here a file PKG_LIST with the packages' list inside.
To download the packages you can use a script like this:
#!/bin/bash
LIST="PKG_LIST"
SRC="ftp://ftp.slackware.no/slackware/slackware-13.1/slackware/"
#"ftp://ftp.slackware.no/slackware/slackware64-13.1/slackware64/"
if [ -f $LIST ]; then
while read line
do
wget "$SRC$line*.t?z"
done < $LIST
fi
Adjust the packages' list, enter your favorite ftp server and run from the command line.
Make the guest
Now let's create the guest and install the packages. As you know you must choose at least a "name", a "context" and an ip. In addition you have to modify most of the rc.* startup scripts removing all the hardware related daemons, and finally replace the /dev dir.
This is done running the script make_slack_vserver.sh that you downloaded before. Adjust the script to your needs:
#!/bin/bash
#
# More info here: http://notes.sagredo.eu/node/7
if [ $# != 1 ]; then
echo "usage: $0 <server-name>"
exit 1
fi
# adjust this to where your things live
NAME=$1
HOSTNAME=$NAME.myserver.net
IP=10.0.0.147
INTERFACE=eth0:$IP/24
CONTEXT=1010
# where is the vservers dir? default is /vservers
VDIR="/usr/local/vservers"
# the directory where you unpacked slack_vserver.tar.gz
SETUP="/path/to/slack_vserver"
# the directory where you downloaded the slackware packages
PACKAGES="$SETUP/slackware"
# the patch to rc script file (leave as is)
RC="$SETUP/rc"
################### end configuration
# sanity check
if [ ! -d "$VDIR" ]; then
echo ""
echo "Can't find VDIR dir: $VDIR"
echo "Exiting"
echo ""
exit 1
fi
if [ ! -d "$SETUP" ]; then
echo ""
echo "Can't find SETUP dir: $SETUP"
echo "Exiting"
echo ""
exit 1
fi
if [ ! -d "$PACKAGES" ]; then
echo ""
echo "Can't find PACKAGES dir: $PACKAGES"
echo "Exiting"
echo ""
exit 1
fi
if [ ! -f "$RC" ]; then
echo ""
echo "Can't find RC path: $RC"
echo "Exiting"
echo ""
exit 1
fi
# if everything is ok start the install
echo ""
read -p "press any key to make skeleton..."
vserver ${NAME} build -m skeleton \
--hostname ${HOSTNAME} \
--interface ${INTERFACE} \
--flags lock,virt_mem,virt_uptime,virt_cpu,virt_load,sched_hard,hide_netif \
--initstyle sysv
echo "...done"
echo ""
read -p "press any key to move to a temp dir the /dev folder..."
mv $VDIR/$NAME/dev $VDIR/$NAME/dev2
echo ""
read -p "press any key to install packages..."
cd $PACKAGES
installpkg -root $VDIR/$NAME *.t?z;
echo "...done"
echo ""
echo ""
read -p "press any key to copy rc script to /etc/rc.d/init.d..."
echo ""
echo "copying rc to /etc/rc.d/init.d/rc"
echo ""
cp -p $RC $VDIR/$NAME/etc/rc.d/init.d/
echo "done"
echo ""
echo "removing x flag to rc.inet1 and rc.sshd"
chmod -x $VDIR/$NAME/etc/rc.d/rc.inet1 $VDIR/$NAME/etc/rc.d/rc.sshd
echo "done"
echo ""
echo "trying to adjust HOSTNAME, hosts, resolv.conf, profile. Check later..."
cp /etc/resolv.conf $VDIR/$NAME/etc/
cp /etc/localtime $VDIR/$NAME/etc/
rm $VDIR/$NAME/etc/profile
cp /etc/profile $VDIR/$NAME/etc/
echo $HOSTNAME > $VDIR/$NAME/etc/HOSTNAME
echo "127.0.0.1 localhost" > $VDIR/$NAME/etc/hosts
echo "$IP $HOSTNAME $NAME" >> $VDIR/$NAME/etc/hosts
touch $VDIR/$NAME/etc/mtab
touch $VDIR/$NAME/etc/fstab
echo "done"
echo ""
read -p "press any key to restore /dev2 to /dev"
rm -r $VDIR/$NAME/dev
mv $VDIR/$NAME/dev2 $VDIR/$NAME/dev
echo ""
echo "done; DON'T FORGET to patch /etc/rc.d: "
echo "cd $VDIR/$NAME/etc/rc.d"
echo "patch -p1 < $SETUP/slackware-13.1.patch"
echo ""
echo "More info on http://notes.sagredo.eu/node/7"
echo ""
Note that /etc/resolv.conf /etc/localtime /etc/profile are copied form the host. Run it to install the server and all the packages you downloaded.
Apply the patch and start the guest
Once you have installed the server apply the patch:
cd /vservers/vserver_name/etc/rc.d patch -p1 < /path/to/slack_vserver/slackware-13.1.patch vserver <vserver_name> start vserver <vserver_name> enter
Hints
My patch has been tested with Slackware 13.1, but I suppose that this solution should work also in future version with some small adjustment. In any case, if the patch doesn't work with your version of Slackware try to replace rc.0 rc.6 rc.K rc.M rc.inet2 with these (download here). In addition remember to
- leave /etc/rc.d/init.d/rc script as is. These is a very essential script which is started first and runs rc.M on startup or rc.6 on shutdown
- chmod -x rc.inet1 the network is brought up configuring the guest by /etc/vservers
- chmod -x all hardware related services like rc.acpid rc.alsa rc.pcmcia rc.wireless rc.gpm rc.bluetooth rc.hald
- delete all mounts and other hardware related commands in rc.0 rc.6 rc.K rc.M rc.inet2
Contact
Any comments/suggestions/questions to roberto.puzzanghera at sagredo dot eu, [1]
Patch used
Patch for Slackware 13.1 guest on a Linux-Vserver host
======================================================
by Roberto Puzzanghera - http://notes.sagredo.eu
October 22 2010
diff -crB rc.d-original/rc.0 rc.d-patched/rc.0
*** rc.d-original/rc.0 2010-03-20 01:14:07.000000000 +0100
--- rc.d-patched/rc.0 2010-10-11 23:35:12.000000000 +0200
***************
*** 37,58 ****
;;
esac
- # Save the system time to the hardware clock using hwclock --systohc.
- if [ -x /sbin/hwclock ]; then
- # Check for a broken motherboard RTC clock (where ioports for rtc are
- # unknown) to prevent hwclock causing a hang:
- if ! grep -q -w rtc /proc/ioports ; then
- CLOCK_OPT="--directisa"
- fi
- if grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
- echo "Saving system time to the hardware clock (UTC)."
- /sbin/hwclock $CLOCK_OPT --utc --systohc
- else
- echo "Saving system time to the hardware clock (localtime)."
- /sbin/hwclock $CLOCK_OPT --localtime --systohc
- fi
- fi
-
# Run any local shutdown scripts:
if [ -x /etc/rc.d/rc.local_shutdown ]; then
/etc/rc.d/rc.local_shutdown stop
--- 37,42 ----
***************
*** 98,115 ****
sh /etc/rc.d/rc.messagebus stop
fi
- # Unmount any NFS, SMB, or CIFS filesystems:
- echo "Unmounting remote filesystems."
- /bin/umount -v -a -r -t nfs,smbfs,cifs
-
- # Try to shut down pppd:
- PS="$(ps ax)"
- if echo "$PS" | /bin/grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
- fi
-
# Bring down the networking system, but first make sure that this
# isn't a diskless client with the / partition mounted via NFS:
if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
--- 82,87 ----
***************
*** 127,139 ****
sleep 2
fi
- # Shut down PCMCIA devices:
- if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to deactivate:
- /bin/sleep 5
- fi
-
# Turn off process accounting:
if [ -x /sbin/accton -a -r /var/log/pacct ]; then
/sbin/accton off
--- 99,104 ----
***************
*** 181,203 ****
rm -f /var/lock/subsys/*
fi
- # Turn off swap:
- echo "Turning off swap."
- /sbin/swapoff -a
- /bin/sync
-
- # Umount any LVM volumes:
- if /bin/mount | /bin/grep -q '^/dev/mapper/' ; then
- echo "Unmounting LVM volumes."
- /bin/umount -v $(/bin/mount | /bin/grep '^/dev/mapper/' | /bin/cut -d ' ' -f 3 | /bin/tac)
- fi
-
- echo "Unmounting local file systems."
- /bin/umount -v -a -t no,proc,sysfs
-
- echo "Remounting root filesystem read-only."
- /bin/mount -v -n -o remount,ro /
-
# This never hurts:
/bin/sync
--- 146,151 ----
***************
*** 222,266 ****
done
fi
- # Deactivate LVM volume groups:
- if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
- fi
-
- # This never hurts again (especially since root-on-LVM always fails
- # to deactivate the / logical volume... but at least it was
- # remounted as read-only first)
- /bin/sync
-
- # sleep 3 fixes problems with some hard drives that don't
- # otherwise finish syncing before reboot or poweroff
- /bin/sleep 3
-
# This is to ensure all processes have completed on SMP machines:
wait
-
- if [ -x /sbin/genpowerd ]; then
- # See if this is a powerfail situation:
- if /bin/egrep -q "FAIL|SCRAM" /etc/upsstatus 2> /dev/null ; then
- # Signal UPS to shut off the inverter:
- /sbin/genpowerd -k
- if [ ! $? = 0 ]; then
- echo
- echo "There was an error signaling the UPS."
- echo "Perhaps you need to edit /etc/genpowerd.conf to configure"
- echo "the serial line and UPS type."
- # Wasting 15 seconds of precious power:
- /bin/sleep 15
- fi
- fi
- fi
-
- # Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
- if [ "$command" = "reboot" ]; then
- echo "Rebooting."
- /sbin/reboot
- else
- /sbin/poweroff
- fi
-
--- 170,174 ----
diff -crB rc.d-original/rc.6 rc.d-patched/rc.6
*** rc.d-original/rc.6 2010-03-20 01:14:07.000000000 +0100
--- rc.d-patched/rc.6 2010-10-11 23:35:12.000000000 +0200
***************
*** 37,58 ****
;;
esac
- # Save the system time to the hardware clock using hwclock --systohc.
- if [ -x /sbin/hwclock ]; then
- # Check for a broken motherboard RTC clock (where ioports for rtc are
- # unknown) to prevent hwclock causing a hang:
- if ! grep -q -w rtc /proc/ioports ; then
- CLOCK_OPT="--directisa"
- fi
- if grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
- echo "Saving system time to the hardware clock (UTC)."
- /sbin/hwclock $CLOCK_OPT --utc --systohc
- else
- echo "Saving system time to the hardware clock (localtime)."
- /sbin/hwclock $CLOCK_OPT --localtime --systohc
- fi
- fi
-
# Run any local shutdown scripts:
if [ -x /etc/rc.d/rc.local_shutdown ]; then
/etc/rc.d/rc.local_shutdown stop
--- 37,42 ----
***************
*** 98,115 ****
sh /etc/rc.d/rc.messagebus stop
fi
- # Unmount any NFS, SMB, or CIFS filesystems:
- echo "Unmounting remote filesystems."
- /bin/umount -v -a -r -t nfs,smbfs,cifs
-
- # Try to shut down pppd:
- PS="$(ps ax)"
- if echo "$PS" | /bin/grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
- fi
-
# Bring down the networking system, but first make sure that this
# isn't a diskless client with the / partition mounted via NFS:
if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
--- 82,87 ----
***************
*** 127,139 ****
sleep 2
fi
- # Shut down PCMCIA devices:
- if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to deactivate:
- /bin/sleep 5
- fi
-
# Turn off process accounting:
if [ -x /sbin/accton -a -r /var/log/pacct ]; then
/sbin/accton off
--- 99,104 ----
***************
*** 181,203 ****
rm -f /var/lock/subsys/*
fi
- # Turn off swap:
- echo "Turning off swap."
- /sbin/swapoff -a
- /bin/sync
-
- # Umount any LVM volumes:
- if /bin/mount | /bin/grep -q '^/dev/mapper/' ; then
- echo "Unmounting LVM volumes."
- /bin/umount -v $(/bin/mount | /bin/grep '^/dev/mapper/' | /bin/cut -d ' ' -f 3 | /bin/tac)
- fi
-
- echo "Unmounting local file systems."
- /bin/umount -v -a -t no,proc,sysfs
-
- echo "Remounting root filesystem read-only."
- /bin/mount -v -n -o remount,ro /
-
# This never hurts:
/bin/sync
--- 146,151 ----
***************
*** 222,266 ****
done
fi
- # Deactivate LVM volume groups:
- if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
- fi
-
- # This never hurts again (especially since root-on-LVM always fails
- # to deactivate the / logical volume... but at least it was
- # remounted as read-only first)
- /bin/sync
-
- # sleep 3 fixes problems with some hard drives that don't
- # otherwise finish syncing before reboot or poweroff
- /bin/sleep 3
-
# This is to ensure all processes have completed on SMP machines:
wait
-
- if [ -x /sbin/genpowerd ]; then
- # See if this is a powerfail situation:
- if /bin/egrep -q "FAIL|SCRAM" /etc/upsstatus 2> /dev/null ; then
- # Signal UPS to shut off the inverter:
- /sbin/genpowerd -k
- if [ ! $? = 0 ]; then
- echo
- echo "There was an error signaling the UPS."
- echo "Perhaps you need to edit /etc/genpowerd.conf to configure"
- echo "the serial line and UPS type."
- # Wasting 15 seconds of precious power:
- /bin/sleep 15
- fi
- fi
- fi
-
- # Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
- if [ "$command" = "reboot" ]; then
- echo "Rebooting."
- /sbin/reboot
- else
- /sbin/poweroff
- fi
-
--- 170,174 ----
diff -crB rc.d-original/rc.K rc.d-patched/rc.K
*** rc.d-original/rc.K 2008-12-02 21:31:48.000000000 +0100
--- rc.d-patched/rc.K 2010-10-11 23:37:36.000000000 +0200
***************
*** 57,78 ****
/etc/rc.d/rc.nfsd stop
fi
- # Unmount any NFS, SMB, or CIFS filesystems:
- echo "Unmounting remote filesystems."
- umount -a -r -t nfs,smbfs,cifs
-
- # Shut down PCMCIA devices:
- if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to deactivate:
- sleep 5
- fi
-
- # Terminate acpid before syslog:
- if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
- . /etc/rc.d/rc.acpid stop
- fi
-
# Kill all processes.
echo
echo "Sending all processes the SIGHUP signal."
--- 57,62 ----
diff -crB rc.d-original/rc.M rc.d-patched/rc.M
*** rc.d-original/rc.M 2010-02-07 04:01:28.000000000 +0100
--- rc.d-patched/rc.M 2010-10-11 23:44:13.000000000 +0200
***************
*** 20,29 ****
/sbin/ldconfig &
fi
- # Screen blanks after 15 minutes idle time, and powers down in one hour
- # if the kernel supports APM or ACPI power management:
- /bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
# Set the hostname.
if [ -r /etc/HOSTNAME ]; then
/bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
--- 20,25 ----
***************
*** 36,66 ****
# Save the contents of 'dmesg':
/bin/dmesg -s 65536 > /var/log/dmesg
- # Initialize PCMCIA devices:
- #
- # NOTE: This used to be started near the top of rc.S so that PCMCIA devices
- # could be fsck'ed along with the other drives. This had some unfortunate
- # side effects, however, since root isn't yet read-write, and /var might not
- # even be mounted the .pid files can't be correctly written in /var/run and
- # the pcmcia system can't be correctly shut down. If you want some PCMCIA
- # partition to be mounted at boot (or when the card is inserted) then add
- # the appropriate lines to /etc/pcmcia/scsi.opts.
- #
- # Note that the stuff in /etc/pcmcia/ is only for 2.4.x kernels using
- # 16-bit PCMCIA cards (not 32-bit Cardbus cards!). For example, with a
- # wireless card you might need to set options in /etc/pcmcia OR in
- # /etc/rc.d/rc.wireless.conf, or even in /etc/rc.d/rc.inet1.conf (with
- # extra options if needed for the encryption key, ESSID, etc.)
- #
- # Hopefully this situation will be unified in the future, but for now
- # that's how it is...
- #
- if [ -x /etc/rc.d/rc.pcmcia ]; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- sleep 5
- fi
-
# Start the system logger.
if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
. /etc/rc.d/rc.syslog start
--- 32,37 ----
***************
*** 72,97 ****
/usr/bin/fc-cache -f &
fi
- # If we are returning from single-user mode we will need to restart
- # udevd on systems that use udev:
- if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
- if ! grep -wq nohotplug /proc/cmdline ; then
- if [ -x /etc/rc.d/rc.udev ]; then
- /bin/sh /etc/rc.d/rc.udev start
- fi
- fi
- fi
-
# Initialize the networking hardware.
if [ -x /etc/rc.d/rc.inet1 ]; then
. /etc/rc.d/rc.inet1
fi
- # Look for additional USB/SCSI/IEEE1394/etc devices on multiple LUNs:
- if [ -x /etc/rc.d/rc.scanluns ]; then
- . /etc/rc.d/rc.scanluns
- fi
-
# Start networking daemons:
if [ -x /etc/rc.d/rc.inet2 ]; then
. /etc/rc.d/rc.inet2
--- 43,53 ----
***************
*** 118,134 ****
chmod 755 / 2> /dev/null
chmod 1777 /tmp /var/tmp
- # Start APM or ACPI daemon.
- # If APM is enabled in the kernel, start apmd:
- if [ -e /proc/apm ]; then
- if [ -x /usr/sbin/apmd ]; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
- elif [ -x /etc/rc.d/rc.acpid ]; then # otherwise, start acpid:
- . /etc/rc.d/rc.acpid start
- fi
-
# Update any existing icon cache files:
if find /usr/share/icons 2> /dev/null | grep -q icon-theme.cache ; then
for theme_dir in /usr/share/icons/* ; do
--- 74,79 ----
***************
*** 161,171 ****
sh /etc/rc.d/rc.hald start
fi
- # Start Bluetooth:
- if [ -x /etc/rc.d/rc.bluetooth ]; then
- sh /etc/rc.d/rc.bluetooth start
- fi
-
# Start wicd:
if [ -x /etc/rc.d/rc.wicd ]; then
sh /etc/rc.d/rc.wicd start
--- 106,111 ----
***************
*** 207,242 ****
/etc/rc.d/rc.atalk
fi
- # Start smartd, which monitors the status of S.M.A.R.T. compatible
- # hard drives and reports any problems. Note some devices (which aren't
- # smart, I guess ;) will hang if probed by smartd, so it's commented out
- # by default.
- #if [ -x /usr/sbin/smartd ]; then
- # /usr/sbin/smartd
- #fi
-
- # If we're using udev, make /dev/cdrom and any other optical drive symlinks
- # if some udev rule hasn't made them already:
- if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems; then
- if ! grep -wq nohotplug /proc/cmdline ; then
- if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then
- /bin/sh /lib/udev/rc.optical-symlinks
- fi
- fi
- fi
-
- # Monitor the UPS with genpowerd.
- # To use this, uncomment this section and edit your settings in
- # /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
- # see "man genpowerd" or the extensive documentation in the
- # /usr/doc/genpower-*/ directory.
- # You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
- # support for stopping the UPS's inverter after the machine halts.
- #if [ -x /sbin/genpowerd ]; then
- # echo "Starting genpowerd daemon..."
- # /sbin/genpowerd
- #fi
-
# Turn on process accounting. To enable process accounting, make sure the
# option for BSD process accounting is enabled in your kernel, and then
# create the file /var/log/pacct (touch /var/log/pacct). By default, process
--- 147,152 ----
***************
*** 301,311 ****
. /etc/rc.d/rc.sendmail start
fi
- # Load ALSA (sound) defaults:
- if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
- fi
-
# Load a custom screen font if the user has an rc.font script.
if [ -x /etc/rc.d/rc.font ]; then
. /etc/rc.d/rc.font
--- 211,216 ----
***************
*** 337,347 ****
. /etc/rc.d/rc.samba start
fi
- # Start the GPM mouse server:
- if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
- fi
-
# If there are SystemV init scripts for this runlevel, run them.
if [ -x /etc/rc.d/rc.sysvinit ]; then
. /etc/rc.d/rc.sysvinit
--- 242,247 ----
diff -crB rc.d-original/rc.inet2 rc.d-patched/rc.inet2
*** rc.d-original/rc.inet2 2007-09-18 00:07:32.000000000 +0200
--- rc.d-patched/rc.inet2 2010-10-11 23:46:08.000000000 +0200
***************
*** 15,41 ****
# At this point, we are ready to talk to The World...
-
- # Mount remote (NFS) filesystems:
- if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
- # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS
- # volumes defined in /etc/fstab since these will need to be running in order
- # to mount them. If they are not running, attempting to mount an NFS
- # partition will cause mount to hang, or at least result in unreliable
- # operation. Keep this in mind if you plan to mount unlisted NFS
- # partitions...
- # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run
- # whether it is set as executable or not. If you don't want to run it,
- # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc.
- if [ -r /etc/rc.d/rc.rpc ]; then
- sh /etc/rc.d/rc.rpc start
- fi
- echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs"
- /sbin/mount -a -t nfs # This may be our /usr runtime!
- # Show the mounted volumes:
- /sbin/mount -v -t nfs
- fi
-
# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
# and rpc.statd. This might be needed to mount NFS partitions that are not
# listed in /etc/fstab. Starting this twice won't hurt as the script will
--- 15,20 ----
