Difference between revisions of "Upstart issues"

Revision as of 20:20, 21 October 2011 (view source) Glenn (Talk | contribs) (+cat) ← Older edit		Revision as of 09:46, 25 January 2012 (view source) 85.183.6.49 (Talk) (→‎Remove console outputs) Newer edit →
Line 101:		Line 101:
	which will disable all lines with 'console output', and Upstart won't try output to it. Which is a good thing since it doesn't exist.		which will disable all lines with 'console output', and Upstart won't try output to it. Which is a good thing since it doesn't exist.
		+
		+	Another reason might be that you removed control-alt-delete.conf from /etc/init/ - which is used for a proper shutdown of the vserver:
		+	20:00 <@Bertl> util-vserver does not execute stuff inside the guest, it simply sends a signal to init (inside the guest)
		+	20:01 <@Bertl> (the singnal is SIGINT, and this equals to the CTRL-ALT-DEL action)
	=== Adapt /etc/init/rc-sysinit.conf inside the guest ===		=== Adapt /etc/init/rc-sysinit.conf inside the guest ===

---

Revision as of 09:46, 25 January 2012

Contents 1 Running Ubuntu Lucid 2 Running an upstart based guest 2.1 Prepare the host 2.2 Remove low level services inside the guest 2.3 Services you want to look over 2.4 Fake low level events inside the guest 2.5 Remove console outputs 2.6 Adapt /etc/init/rc-sysinit.conf inside the guest 2.7 Notes for debugging 2.8 Notes for older kernels 2.9 Init procedure doesn't complete 2.9.1 SSH 2.9.2 D-BUS

Running Ubuntu Lucid

There's a inipost-file ( http://static.thedudes.org/initpost ) that can be used when creating hosts, so there's no need for manual tweaking.

Put it in

/usr/lib/util-vserver/distributions/lucid

Install the vserver with --initstyle plain. You still need to look over services when installing since we're tweaking Upstarts normal emits.

!! Note !! The inipost-file is missing. You can temporarely download it from: http://dl.dropbox.com/u/1171189/initpost

And more permanently here: http://capa-support.mikrov.dk/downloads/initpost

You can also have a look at http://wiki.raceme.org/dokuwiki/tof:computer:vserver:upstart_ubuntu_lucid for a manual procedure.

Running an upstart based guest

currently upstart based guests need some manual tweaking to make them work inside a vserver host.

Prepare the host

First of all you need to set the init style of your vserver to plain

# echo plain > /etc/vservers/<vservername>/apps/init/style

Or use '--initstyle plain' when creating the host.

I'd also strongly recommend to mount /var/run and /var/lock of the guest as tmpfs. So add the following lines to /etc/vservers/<vservername>/fstab

none    /var/run        tmpfs   size=16m,nosuid,mode=0755       0 0
none    /var/lock       tmpfs   size=16m,noexec,nosuid,nodev    0 0

Remove low level services inside the guest

Then you need to get rid of anything in /etc/init/ that tries to fiddle with your Server's Hardware or other low-level Stuff that's already handled by your host's kernel/system. Having one such scriptlet still enabled might cause the whole upstart system to fail (like not beeing able to open /dev/console or failing to start the udev system). Just remove these scriptlets, move them out of the way or rename them to something not ending in .conf. Be aware that upstart also parses subfolders of /etc/init/ for .conf files.

This is what I deleted on a basic Ubuntu 9.10 guest:

dmesg.conf
hostname.conf
hwclock-save.conf
hwclock.conf
mountall-net.conf
mountall-reboot.conf
mountall-shell.conf
mountall.conf
network-interface.conf
networking.conf
procps.conf
rsyslog-kmsg.conf
tty1.conf
tty2.conf
tty3.conf
tty4.conf
tty5.conf
tty6.conf
upstart-udev-bridge.conf

In Ubuntu 10.04 you also want to remove:

console-setup.conf 

Services you want to look over

There are files in the /etc/init dir that you want to check the startup line of. It could be waiting for something that will never happend since it is in a VServer and thus never start.

for example mysql.conf needs a 'net-device-up'-emit also. by running

vserver <name> exec initctl emit net-device-up

it will come up like a charm. Either put this in vserver.conf or remove in from mysql.conf.

Jobs that doesn't start from scratch:

mysql-server-5.1 (mysql.conf)

Fake low level events inside the guest

Finally you need to fake emit the events that some of these scripts would do during regular boot. Probably the cleanest approach is to add a scriptlet vserver.conf to /etc/init/ with this content:

start on startup
script
       touch /var/run/utmp
       chown root:utmp /var/run/utmp
       chmod 664 /var/run/utmp
       initctl emit virtual-filesystems
       initctl emit local-filesystems
       initctl emit remote-filesystems
       initctl emit filesystem
end script

The utmp stuff is needed if you mount /var/run as tmpfs and you don't create utmp anywhere else.

Remove console outputs

If your VServer hangs on the command

vserver <name> stop

and puts out

A timeout occured while waiting for the vserver to finish and it will
be killed by sending a SIGKILL signal. The following process list
might be useful for finding out the reason of this behavior:

----------------------------------------------------------------------
<pid> <context> <name>           ?        Ss     0:00 /sbin/init
<pid> <context> <name>           ?        Ss     0:00 /sbin/init
----------------------------------------------------------------------

you should run

sed -i 's/^\(console output\)$/#\1/1' /etc/vservers/$name/vdir/etc/init/*

which will disable all lines with 'console output', and Upstart won't try output to it. Which is a good thing since it doesn't exist.

Another reason might be that you removed control-alt-delete.conf from /etc/init/ - which is used for a proper shutdown of the vserver: 20:00 <@Bertl> util-vserver does not execute stuff inside the guest, it simply sends a signal to init (inside the guest) 20:01 <@Bertl> (the singnal is SIGINT, and this equals to the CTRL-ALT-DEL action)

Adapt /etc/init/rc-sysinit.conf inside the guest

This depends on net-device-up IFACE=lo, remove this from the start line so that it reads:
start on filesystem

This scriptlet tries to parse /proc/cmdline which will not work and probably isn't needed inside a vserver.
Simply comment out or delete the whole for ARG in $(cat /proc/cmdline) do...done loop.

Notes for debugging

First you need to run Upstart with the --debug flag, one way of doing it is inserting

"--debug"

in INITCMD_START under the xplain-clause inside /usr/lib/util-vserver/vserver.functions (row 316 here) so it reads INITCMD_START=( /sbin/init "--debug" )

Second you should enable console output in the rc-files inside /etc/init, if you had commented them out before you could do

sed -i 's/#^\(console output\)$/\1/1' /etc/vservers/$name/vdir/etc/init/*

Third you need a device to act as console, I used tty0.

cp -a /dev/tty0 /etc/vservers/$name/vdir/dev/console

If you do things at a console of the machine it will now print out detailed information. More on how to debug a Upstart job you'll find on http://upstart.ubuntu.com/wiki/Debugging. Notice that if one fails they all fail.

Notes for older kernels

If you encounter upstart errors like this:

$ vserver foo start
init: missing runlevel
Try `init --help' for more information.

or

$ vserver foo start
telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused

then you're probably running the current stable version 2.6.22.19-vs2.2.0.7.

Upstart's /sbin/init implementation requires to be PID 1. It is linked against NPTL (in contrast to sysvinit), which has a bug in it's caching getpid(2) wrapper. With this kernel version getpid(2) returns the cached PID to init, resulting in init replacing itself with telinit. You can fix this by upgrading to a 2.6.26+ kernel and a newer vserver patch, or by patching upstart:

diff --git a/init/main.c b/init/main.c
index bfcd528..c6c9304 100644
--- a/init/main.c
+++ b/init/main.c
@@ -37,6 +37,7 @@
 #include <string.h>
 #include <syslog.h>
 #include <unistd.h>
+#include <syscall.h>
 
 #include <linux/kd.h>
 
@@ -131,7 +132,7 @@ main (int   argc,
 	}
 
 	/* Check we're process #1 */
-	if (getpid () > 1) {
+	if (syscall(SYS_getpid) > 1) {
 		execv (TELINIT, argv);
 		/* Ignore failure, probably just that telinit doesn't exist */

For more information see the man pages of getpid(2) (NOTES) and clone(2) (BUGS).

Init procedure doesn't complete

SSH

If you've completed all above steps and some init scripts doesn't get invoked at all (most notably old SYSV init scripts) you might have encountered same error that I did. In Lucid guest I had to comment out following line in /etc/init/ssh.conf:

 # replaces SSHD_OOM_ADJUST in /etc/default/ssh
 oom never

to

 # replaces SSHD_OOM_ADJUST in /etc/default/ssh
 #oom never

After commenting out this line initialization completed successfully.

D-BUS

When creating guest as chroot some packages you might expect are missing. One of these is D-BUS. Strangely enough the /etc/init/dbus.conf gets installed which prevents Upstart to finish its starting sequence.

Solution: install dbus package

   sudo aptitude install dbus